MEP ENGINEERING SERVICES

TELL US ABOUT YOUR PROJECT!

If you have a document to send, use:
info@gdiengdesign.com

Efficient MEP Solutions with Licensed Engineering Stamps

image (6)

Customized Engineering Services:

Our team of practical professionals specializes in delivering MEP solutions customized to your project’s unique requirements. From innovative designs to efficient implementation, we have the expertise to bring your vision to life.

new-img

Licensed Engineers Stamping:

Rest assured that your project’s drawings will be stamped by our team of licensed engineers. Our professionals hold the necessary certifications to provide you with the assurance that your MEP systems meet the required standards and regulations.

image (7)

Multidisciplinary Solutions and Local Network:

Our multidisciplinary approach allows us to seamlessly integrate MEP systems with other project elements. Additionally, our extensive network of customers and vendors enables us to provide comprehensive solutions that enhance project efficiency and success.

Mask group

Effective Communication and Collaboration:

We prioritize open communication and collaboration throughout our partnership. Our team is committed to promptly returning calls, embracing the exchange of ideas, and sharing information to ensure a smooth workflow and successful project delivery.

Our MEP Services

Mechanical Services:

Our mechanical engineering team specializes in HVAC (heating, ventilation, and air conditioning) system design, installation, and maintenance. We ensure optimal indoor air quality and climate control, creating comfortable and productive environments for your building occupants.

Electrical Services:

Our electrical engineers are proficient in designing and implementing electrical systems for a wide range of projects. From power distribution and lighting design to fire alarm systems and energy management, we provide comprehensive electrical solutions that prioritize safety, efficiency, and compliance with industry standards.

Plumbing Services:

Our plumbing experts offer reliable plumbing solutions for both residential and commercial projects. We handle everything from plumbing system design and installation to maintenance and repairs. With our attention to detail and commitment to quality craftsmanship, we ensure that your plumbing systems function flawlessly and efficiently.

One Call Can Solve All Your Problems

telephone-150x150-1 1

And, We Have More Options To Contact Us

One Call Can Solve All Your Problems

telephone-150x150-1 1

+1 346 -250 -7210

And, We Have More Options To Contact Us

Our Core Value

SAFETY

To offer a safe product and environment for our customers and employees.

QUALITY

Products, services, communications or documentation to show high quality levels.

EMPLOYEE ENGAGEMENT

Our employees are our family members. Their Engagement in business or between each other is a priority for us.

CUSTOMER SATISFACTION

To maintain very high customer satisfaction where we have become the No. 1 choice for them n our field.

Featured Projects

Markets Served

Our Company Journey & Experince

About GDI Engineering

GDI Engineering is a leading provider of engineering consulting services nationwide. With our extensive experience and expertise in the building and design sectors, we offer a unique and comprehensive range of multidisciplinary solutions. We are dedicated to delivering a higher level of service to our private clients and businesses. Trust GDI Engineering for exceptional engineering consultancy that exceeds expectations.

Mission & Vision

At GDI Engineering, we use our expertise, drive, and skills to build a more integrated, livable society that ties us to our customers and to one another. For our clients, our communities, and our workers, this translates into prosperity, resiliency, growth, and success.

About GDI Engineering

GDI Engineering is a leading provider of engineering consulting services nationwide. With our extensive experience and expertise in the building and design sectors, we offer a unique and comprehensive range of multidisciplinary solutions. We are dedicated to delivering a higher level of service to our private clients and businesses. Trust GDI Engineering for exceptional engineering consultancy that exceeds expectations.

Mission & Vision

At GDI Engineering, we use our expertise, drive, and skills to build a more integrated, livable society that ties us to our customers and to one another. For our clients, our communities, and our workers, this translates into prosperity, resiliency, growth, and success.

Customer's Reviews

Get in touch

If you have a document to send, use use:

FAQ (Frequently Asked Questions)

Let’s work together

Our team is of highly qualified professionals and engineers, ready to hear from you. Please feel free to contact us

Copyright © 2024 GDI Engineering

West Texas Graduation Services

Client: WCA Architects 

Location: 4319 50TH STREET Lubbock, Texas 79413 

Surface area: 6,500 SF 

Located in Lubbock, Texas, the West Texas Graduation Services project involved the meticulous preparation of a comprehensive MEP design set for a 6,500 sq. ft. expansion. This included the addition of both storage space and office facilities within the existing building. Our team ensured that all MEP services conformed to local codes and were tailored to meet the specific needs of the client, incorporating a new demising wall, as well as ventilation and air conditioning solutions for the newly altered areas.

The electrical scope encompassed both lighting and power supply, with careful selection of fixtures and controls to meet regulatory standards. Additionally, the plumbing system was designed to accommodate new fixtures, including point-of-use electric water heaters. Throughout the process, we collaborated closely with the client to address technical inquiries and ensure compliance, ultimately facilitating a smooth permitting process.

Sample of drawings:

WEC OCala

Client: MJS Designers Group

Location: The Shoppes off 80th,World Equestrian Center

Ocala – Florida  

Surface area:

The WEC Retail project in Florida involved the preparation of MEP (Mechanical, Electrical,

and Plumbing) and structural design for a retail development.

The MEP design covered a total of 7 warm shell buildings intended for retail use, including

tenant improvement plans for specific units.

The mechanical design incorporated chilled water air handling units connected to a district

cooling network, flexible ductwork layout, and plumbing for restrooms and HVAC drainage.

The electrical design included lighting, power, and emergency lighting for the buildings.

Structural analysis and design were performed for the foundations, columns, walls, slabs,

beams, and roof framing.

Deliverables included construction documents, load calculations, Revit models, and energy

compliance reports. This comprehensive design work aimed to provide a turnkey solution

for the retail development project in Florida.

Sample of drawings:

Nance Ronin Cafe

Client: Ronin Art House

Location: 1310 Nance St. Suite C Houston, Texas 77002

Surface area: 1,715 SF

At Nance Cafe, we’ve meticulously designed a comprehensive MEP (Mechanical, Electrical, and Plumbing) system to ensure the cafe’s efficient and comfortable operation. Our team has carefully considered the existing equipment and building program to create a tailored solution. 

The mechanical design includes a detailed air conditioning, heating, and ventilation layout, complemented by thorough heat load and ventilation calculations. The electrical design features a comprehensive power layout, lighting plan, and power analysis to validate the existing infrastructure. The plumbing design encompasses water supply, drainage, and gas systems, with the selection or validation of essential components like the water heater and grease trap. Throughout the process, we’ve maintained a focus on compliance with relevant codes and regulations, ensuring a safe and efficient environment for the Nance Cafe patrons. 

Sample of drawings:

Weber Residence

Client: Tunnel to Towers Foundation

Location: 623 A Los Colinas Dr., Wimberley, TX 78676

Surface area: 2,411 SF

 

The Weber Project in Wimberley, Texas is situated on a 2,411 square foot site.

A comprehensive structural analysis was conducted using the RFEM 6 finite element analysis

software, ensuring the design complies with all relevant building standards for the local area.

All load-bearing elements and framing components have been carefully engineered to meet both

ultimate and serviceability limit states.

The detailed construction solutions have been accurately reflected in the project drawings, providing

a clear visual representation of the proposed design.

Sample of drawings:

Sherwin Williams Retail Store

Client: Bluestone Partners, LLC

Location: 1600 McKinney, Texas 

Surface area: 10,065 SF 

In McKinney, Texas, our team completed the MEP (Mechanical, Electrical, and Plumbing) design for a new Sherwin Williams retail store. The project encompassed a total surface area of 10,065 square feet. 

The key aspects of the project included: 

Mechanical Systems: The HVAC system consists of two electric cooling and gas heating packaged rooftop units – one dedicated to the wholesale area and the other serving the remaining spaces. The rooftop units were strategically placed to align with the existing building openings. The design also included detailed ventilation and heat load calculations to ensure code compliance and occupant comfort. 

Electrical Systems: The electrical scope covered the power distribution, lighting, and controls. This included the preparation of power plans for tenant equipment, mechanical, and plumbing loads. A dedicated electrical meter was provided for the tenant space. The lighting design incorporated both normal and emergency lighting systems with comprehensive lighting controls. 

Plumbing Systems: The plumbing design addressed the water supply, drainage, and waste networks for the restrooms and tenant equipment. It featured an electric water heater, floor drains for the restrooms, and area drains as required. 

The plumbing design was coordinated with the existing shell provisions. 

The project also included the preparation of a COMcheck energy report covering the internal lighting, external lighting, and mechanical equipment to ensure energy code compliance. Our team provided comprehensive MEP design services, addressing one internal round of comments and all city permitting requirements until the final approval was obtained. 

Sample of drawings:

Daycare Unity Church

Client: Urban Area Architects 

Location: 2111 River Valley Dr, Spring, Texas 77373 

Surface area: 6,000 SF 

The Unity Children’s Home Daycare is a new 6,000 square foot, two-story building constructed to house a daycare facility. GDI was hired to design the mechanical, electrical, and plumbing (MEP) systems for the project and provide the full set of construction documents. This includes designing the HVAC, electrical, and plumbing systems to meet the needs of the daycare operation. The MEP design had to ensure the building provided a comfortable, safe, and code-compliant environment for the children and staff. Key considerations included sufficient heating, cooling, ventilation, lighting, and plumbing fixtures to serve the classrooms, offices, and other functional spaces. GDI’s MEP engineering expertise allowed them to develop a comprehensive design package to guide the construction of this new children’s daycare facility. 

The completed building will provide a modern, high-quality space to support the educational and developmental needs of the children in the community. 

Sample of drawings:

Frullati Cafe'

Client: Bluestone Partners, LLC. 

Location: 2271, 730 HOPKINS STREET, UNIT 100, SAN  MARCOS, TX 78666 

Surface area: 1400 SF 

The Frullati Cafe project involved ensuring the functionality and efficiency of the existing restaurant space  through comprehensive mechanical, electrical, and plumbing (MEP) upgrades. The key aspects of the project 

include: 

This project demonstrates the team’s ability to optimize the functionality of an existing commercial space by integrating new tenant requirements with the existing building systems, ensuring a seamless and code-compliant  transition for the Frullati Cafe. 

Sample of drawings:

Custom Residence- Galveston

Client: Rockstar Development

Location: 3005 Galveston Suite A 

Surface area: 15799 SF

The Burt ADU project involves the construction of a new 564.7 square foot, single-story, onebedroom

accessory dwelling unit (ADU) in the rear yard of an existing single-family home in Costa

Mesa, California. The project includes the preparation of comprehensive mechanical, electrical, and

plumbing (MEP) plans to support the development of this new ADU.

The MEP scope for this project covers a range of key features. The mechanical system design will

provide ventilation and air conditioning, with options for either a central air handler and heat pump

or ductless mini-split units. The electrical system design includes lighting, power, and dedicated

circuits for major appliances such as the air conditioner, range, and EV charger. Additionally, the

existing 100-amp electrical panel will be upgraded to a 200-amp service. The plumbing system

design addresses the ADU’s water supply, drainage, and a central domestic hot water system, with

connections to either the municipal sewer system or a private septic system.

Finally, the project involves coordinating with local utility providers for power, water, and sewer

connections, as well as preparing permit-ready MEP plans that address any city comments or

requirements. The MEP design will be tailored to meet all relevant building codes and the specific

needs and preferences of the client for this new ADU.

Sample of drawings:

Bemis Family Dental Office

Client: Bluestone Partners, LLC 

Location: City of Lake Worth – Texas 76135 

Surface area: 0.792 Acers, Building: 6,000 SF 

Bemis Family Dental is a 1-story, 6,000 SF stick-frame building that will primarily house a new dental office. The building will be fully air-conditioned and ventilated, except for a small portion that will be leased to a tenant. The dental office is expected to eventually expand into this leased space. Given the presence of overhead trusses, the project team will need to carefully coordinate the HVAC ductwork and other building systems with the structural members. 

The MEP design for the building is being provided by GDI Engineering. This includes a full HVAC system, proper lighting per the reflected ceiling plan, power for the dental equipment, breakroom, and other building systems, as well as comprehensive plumbing. The building will have either a gas or electrical service, and the owner may opt for a separate meter and utility connection for the leasable space during the planning stage. The MEP drawings will provide full details on the mechanical, electrical, and plumbing systems, including equipment schedules, layouts, riser diagrams, and load calculations. 

Sample of drawings:

1215 Centennial Lofts 259 unit Apartment

Client: Ted Trout Architects

Location: 1215 N Flora Rd. Spokane Valley, Washington 99016

Surface Area : 50 Acres

1215 Centennial Lofts is a five-story, 259-unit apartment project located in Spokane, Washington. The 223,994 square foot facility sits on a 50-acre lot and includes a variety of unit types, including studios, one-bedrooms, and two-bedrooms.

The project features 420 parking spaces, as well as amenities such as a clubhouse, café, fitness center, recreation center, and pools. GDI Engineering has been tasked with the structural and MEP (mechanical, electrical, and plumbing) design for the facility.

 

GDI Engineering Scope of Work

The technical outline for the MEP design of the 1215 Centennial Lofts project in Spokane, Washington is comprehensive. It includes the preparation of permit-ready plans for the 259 units and retail spaces, design of the HVAC, lighting, and power systems, as well as plumbing and utilities. Key components cover dedicated electrical and water metering, heating and appliance specifications, exterior lighting, and energy compliance reporting. This detailed MEP design work aims to ensure the 5-story apartment complex is equipped with high-quality, code-compliant mechanical, electrical, and plumbing systems.

Sample of drawings:

6 Unit Apartment

Client: Alux Construction & Development, LLC

Location: 1104 Greer St.Fort Worth, Texas
Surface Area : 9,504 SF

Fort Worth Multifamily 3-Story 6-Unit Apartment MEP Design GDI Engineering was engaged to provide the mechanical, electrical, and plumbing (MEP) design for this new 3- story, 6-unit apartment building in Fort Worth, Texas. The project features a ground floor garage, with the 2nd and 3rd floors dedicated to the residential living spaces. A rooftop outdoor amenity space is also included. 

Our MEP engineering scope included the design of the HVAC systems, electrical power distribution, lighting,  plumbing, and fire protection systems to serve the apartment units and common areas. We worked closely with the architectural and structural teams to coordinate the integration of these building systems throughout the design process. 

The goal was to develop energy-efficient, cost-effective MEP solutions that would provide a comfortable living environment for the residents while meeting all applicable building codes and standards. Our designs emphasized system reliability, maintainability, and flexibility to accommodate the needs of future tenants.

This project showcases GDI’s expertise in multifamily residential MEP engineering, delivering high-quality design  documents on schedule and within budget to support the overall construction of this new apartment  community. 

Sample of drawings: