1. A structural analysis was conducted using a FEA software RFEM 6 according buildings standards for location of the object.
2. All load-bearing elements and framing components have been designed, confirming compliance with ultimate and serviceability limit states.
3. The detailed construction solutions have been accurately reflected in project drawings, providing a visual representation of the proposed design.

• Client : Tunnel to Towers Foundation
• Location: 623 A Los Colinas Dr., Wimberley, TX 78676
• Facilities area: 2 411 sft

1. Structural Design Is In Accordance With The Provisions Of The 2018 International Building Code.
2. A structural analysis was conducted using a FEA software RFEM 6 according buildings standards for location of the object.
3. All load-bearing elements and framing components have been designed, confirming compliance with ultimate and serviceability limit states.
4. The detailed construction solutions have been accurately reflected in project drawings, providing a visual representation of the proposed design.

• Client : Tunnel to Towers Foundation
• Location: 610 Primrose Ln., Pendergrass, GA, 30567
• Facilities area 2 411 sft

1. A structural analysis was conducted using a FEA software RFEM 6 according buildings standards for location of the object.
2. All load-bearing elements and framing components have been designed, confirming compliance with ultimate and serviceability limit states.
3. The detailed construction solutions have been accurately reflected in project drawings, providing a visual representation of the proposed design.

• Client : Tunnel to Towers Foundation
• Location: 230 South Palo Alto Dr. Floresville, TX.
• Facilities area: 2 397 sft
• Size in plan: 83x61 ft

1. A structural analysis was conducted using a FEA software RFEM 6 according buildings standards for location of the object.
2. All load-bearing elements and framing components have been designed, confirming compliance with ultimate and serviceability limit states.
3. The detailed construction solutions have been accurately reflected in project drawings, providing a visual representation of the proposed design.

• Client : Tunnel to Towers Foundation
• Location: Cold Springs Ln, North Port, Fl 34291
• Facilities area 2 411 sft
• Size in plan 72x69 ft

3831 Seabreeze Lane Residence in Galveson, Texas is a two-Story house by the shore. The building was desinged on piles to meet FEMA rules in flood zones. GDI was tasked to perform structural and MEP design for the house with its special requirements in structure. The desing resulted in a cost effective and speedy solution.

• Client: Anonymous
• Location: Galveston, Texas
• Surface Area: 2,000 SF
• Value: $150K
• Category: Flood zone home

It is a wood-framed house with a total of 9,745 SF. There is room in the attic for air handlers, with condensing units outside. GDI Engineering is tasked with the structure and MEP design of the facility. Duration of the project is 20 working days.

• Client: FS Group
• Construction Date:
• Location: HUNTERS CREEK VILLAGE HOUSTON, TEXAS 77024
• Surface Area: 9,745 SF
• Category: Residential

BIRCH ROAD KEMAH (CLEAR LAKE SHORES) Residence is a two story house. The building was designed on piles to meet FEMA rules in flood zones. GDI was tasked to perform structural design for the house with its special requirments in structure. The design resulted in a cost effective and speedy solution.

• Client: anonymous
• Location: BIRCH ROAD KEMAH (CLEAR LAKE SHORES) TEXAS 77565
• Surface Area: 2,100 SF
• Value: $158 K
• Category: Flood Zone Home

Meadows Place Garage-Workshop is an addition to design a workshop with very specific structural and MEP requirements. The client was very detailed in the requirements to meet his needs and vision. GDI Engineering engineers worked very deligently in coordination withe client to make sure his requirements along with required codes and City of Meadows Place are met.

• Client: Private owner
• Location: Meadow Place, Texas
• Surface Area: 1200 SF
• Contracting Investor: Private owner
• Value:
• Category: garage-workshop

Finlay Residence in Spring Texas is a custom home. GDI was tasked to perform structural and MEP design for the house with its special requirments both in structural and MEP. Having both disciplines under the same umbrella resulted in a cost effective and speedy solution.

• Client: Finlay Family
• Location: Spring, Texas
• Surface Area: 5,590 SF
• Value: $565 K
• Category: Custom Home